Reset Blacklist Ipv6 - HP FlexNetwork 7500 Series Command Reference Manual

Predefined user roles
network-admin
mdc-admin
Parameters
source-ip-address: Specifies the IPv4 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 address
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the IPv4 address is on the public network.
all: Specifies all dynamic IPv4 blacklist entries.
Usage guidelines
This command deletes dynamic IPv4 blacklist entries. To delete manual IPv4 blacklist entries, use
the undo blacklist ip command.
Examples
# Clear all dynamic IPv4 blacklist entries.
<Sysname> reset blacklist ip all
Related commands
display blacklist ip

reset blacklist ipv6

Use reset blacklist ipv6 to clear dynamic IPv6 blacklist entries.
Syntax
reset blacklist ipv6 { source-ipv6-address [ vpn-instance vpn-instance-name ] | all }
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
source-ipv6-address: Specifies the IPv6 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv6 address
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the IPv6 address is on the public network.
all: Specifies all dynamic IPv6 blacklist entries.
Usage guidelines
This command deletes dynamic IPv6 blacklist entries. To delete manual IPv6 blacklist entries, use
the undo blacklist ipv6 command.
Examples
# Clear all dynamic IPv6 blacklist entries.
<Sysname> reset blacklist ipv6 all
Related commands
display blacklist ipv6
578