Telnet Server Enable; Telnet Server Ipv6 Acl - HP Enterprise FlexFabric 12900E Series Command Reference Manual

undo telnet server dscp
Default
IPv4 uses the DSCP value 48 for Telnet packets sent to a Telnet client.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value
Usage guidelines
The DSCP value is carried in the ToS field of an IPv4 packet to indicate the packet transmission
priority.
Examples
# Set the DSCP value for IPv4 to use for outgoing Telnet packets to 30 on a Telnet server.
<Sysname> system-view
[Sysname] telnet server dscp 30

telnet server enable

Use
telnet server enable
Use
undo telnet server enable
Syntax
telnet server enable
undo telnet server enable
Default
The Telnet server is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Users can Telnet to the device only when the Telnet server is enabled.
Examples
# Enable the Telnet server.
<Sysname> system-view
[Sysname] telnet server enable

telnet server ipv6 acl

Use
telnet server ipv6 acl
Use
undo telnet server ipv6 acl
: Specifies a DSCP value in the range of 0 to 63.
to enable the Telnet server.
to disable the Telnet server.
to apply an IPv6 ACL to filter IPv6 Telnet logins.
to restore the default.
77