Table of Contents
Advertisement
Using the Schematic View
You can use the Schematic view to display the CoreWatch tables and dials discussed later
in this manual, and configure QoS flows and security filters. To do so, perform one of the
following operations:
•
Move the cursor to an object, click the right-mouse button, and choose a command
from the menu that appears.
•
Double-click a function or data object. CoreWatch then performs the default task for
that function or data object.
CoreWatch Menus
The CoreWatch menus are located at the top of the CoreWatch main window. Use the
commands available on these menus to perform tasks in CoreWatch. For a description of
each menu command, see
CoreWatch Toolbar
The CoreWatch toolbar is a set of buttons located at the top of the CoreWatch window.
Clicking buttons in this toolbar performs some CoreWatch tasks quickly. The following
figure identifies the function of each CoreWatch toolbar button. Details on the Schematic
View, System Dashboard, Configuration Expert, Port Utilization Summary, reports, and
online help are discussed later in this manual.
Opens the
Schematic View
CoreWatch Passwords
If you can access Configuration Expert, you can change the following CoreWatch
passwords:
•
Login Password, which is the password you are prompted for when you start
CoreWatch.
CoreWatch User's Manual
Appendix B: "CoreWatch Menus" on page
Provides Access to the
Opens Configuration
System Dashboard
Expert
Displays the Port
Utilization Summary
Figure 6. CoreWatch toolbar buttons
Chapter 3: Learning CoreWatch Basics
447.
Creates HTML
Reports
Opens CoreWatch
Online Help
33
Advertisement
Table of Contents
