Changing Conþguration Values; Applying Port-Level Changes; Dlci Rate Conþguration - Cabletron Systems SPECTRUM 1800 User Manual

Frame Relay Status and Configuration
Changing Configuration Values
You can edit the values in any Þeld; to do so:
1. To edit a text field, remove the existing value and enter the new value.
2. To edit a field with a menu button, click on the button to display a list of
3. Click on

Applying Port-level Changes

After you have made any port-level conÞguration changes, your changes will not
take effect until you have done an on-line update. To do so:
1. Click mouse button 3 on the port you have been configuring to display the Port
2. Drag down to On-line Update and release.
DLCI Rate Configuration
The Frame Relay DLCI Rate ConÞguration window allows you to set
trafÞc-related operational parameters for each DLCI conÞgured for a selected
frame relay port. Note that the values for these parameters will typically be set by
your frame relay provider; they cannot be freely altered.
When conÞguring DLCI rate values in this window, be sure to use the DLCI identiÞers
which apply to the logical ports conÞgured for the serial port youÕve selected.
NOTE
To access the window:
1. Click mouse button 3 on the frame relay port of interest to display the Port
2. Drag down to Frame Relay DLCI Rate Configuration, and release. The
5-8
options, then drag down to select the option you want.
If you have made changes to the fields but would like to revert back to the
previous values, click on the Refresh button.
Menu.
menu.
Frame Relay DLCI Table window,
to save your changes.
Figure 5-2, will appear.
Configuring Frame Relay Ports