Honda Accord 2008 Manual page 118

07/11/02 09:07:48 61TA0000_050_0019
40. Install the bolts securing the steering gearbox
mounting bracket (A) and the heat shield (B). (right
side)
＊２４
10 x 1.25 mm
38 N·m (3.9 kgf·m, 28 lbf·ft)
A
41. Install the P/S fluid line bracket (A), and secure the
hose with the hose clamp (B).
＊２５
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
B
A
42. Install the A/C compressor (A), then connect the
A/C compressor clutch connector (B).
8 x 1.25 mm
22 N·m
6 x 1.0 mm
(2.2 kgf·m, 16 lbf·ft)
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
B
43. Install a new set ring on the end of each driveshaft,
then install the driveshafts. Make sure each ring
''clicks'' into place in the differential and the
intermediate shaft.
44. Connect the lower arms to the knuckles (see step 5
on page 18-21).
45. Install the damper fork (see step 3 on page 18-21).
46. A/T model: Install the shift cable (see step 34 on
page 14-260).
＊２６
B
A
(cont'd)
5-19