Honda Accord 2008 Manual page 119

07/11/02 09:07:49 61TA0000_050_0020
Engine Assembly
Engine Installation (cont'd)
47. Install exhaust pipe A using new gaskets (B) and
self-locking nuts (C).
＊２７
B
48. Install the splash shield.
＊２８
49. Install the front wheels.
5-20
A
C
10 x 1.25 mm
33 N·m
8 x 1.25 mm (3.4 kgf·m, 24 lbf·ft)
22 N·m (2.2 kgf·m, 16 lbf·ft) Replace.
50. Lower the vehicle on the lift.
51. M/T model: Install the clutch slave cylinder and the
clutch line bracket mounting nut (see step 49 on
page 13-23).
52. M/T model: Install the shift cable and the select
cable, then tighten the three bolts securing the shift
cable holder (see step 46 on page 13-23).
53. Install the A/C condenser fan shroud assembly
(see page 10-14).
54. Install the P/S pump (A), then install the P/S hose
bracket (B).
B
B
55. Install the drive belt (see page 4-31).
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
10 x 1.25 mm
44 N·m (4.5 kgf·m, 33 lbf·ft)
＊２９
A