Honda Accord 2008 Manual page 140

07/11/02 09:22:25 61TA0000_060_0017
8. Install the auto-tensioner.
NOTE: Check the auto-tensioner cam position. If the
position are not aligned, set the first cam to the first
edge of the rack.
＊０７
9. Install cam chain guide B.
＊０８
10. Remove the pin or lock pin (P/N 14511-PNA-003)
from the auto-tensioner.
11. Remove the camshaft lock pin set (07AAB-
6 x 1.0 mm
12 N·m
RWCA120).
(1.2 kgf·m, 8.7 lbf·ft)
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
12. Check the chain case oil seal for damage. If the oil
seal is damaged, replace the chain case oil seal
(see page 6-22).
13. Remove the old liquid gasket from the chain case
mating surfaces, the bolts, and the bolt holes.
14. Clean and dry the chain case mating surfaces.
＊０９
＊１０
(cont'd)
6-17