Honda Accord 2008 Manual page 137

07/11/02 09:22:22 61TA0000_060_0014
Cylinder Head
Cam Chain Removal (cont'd)
12. Remove the cam chain case (A) and the spacer (B).
＊０５
13. Loosely install the crankshaft pulley.
14. Turn the crankshaft counterclockwise to compress
the auto-tensioner.
＊０６
6-14
A
B
15. Align the holes on the lock (A) and the auto-
tensioner (B), then insert a 1.2 mm (0.05 in.)
diameter pin or lock pin (P/N 14511-PNA-003) (C)
into the holes. Turn the crankshaft clockwise to
secure the pin.
NOTE: Check the auto-tensioner cam position. If the
position are not aligned, set the first cam to the first
edge of the rack.
A
16. Remove the auto-tensioner.
C
B
＊０７
＊０８