Save Information - Siemens SINUMERIK 840D sl Operating Manual

13.6.2

Save information

All the machine-specific information of the control is combined in a configuration via the user
interface. You can save machine-specific information on the drives that have been set-up.
Procedure
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
4. Press the "Details" softkey, in order to receive more exact information
on the components displayed.
1. Select the "Diagnostics" operating area.
2. Press the "Version" softkey.
It takes some time to call the version display. While the version data is
being determined a progress message box and the appropriate text are
displayed in the dialog line.
3. Press the "Save" softkey.
The "Save Version Information: Select Archive" window opens. The
following storage locations are offered depending on the configuration:
• Local drive
• Network drives
• USB
• Version data (archive: Data tree in the "HMI data" directory)
4. Then press the "New directory" softkey if you wish to create your own
directory.
5. Press the "OK" softkey. The directory is created.
6. Press the "OK" softkey again to confirm the storage location.
Alarm, error and system messages
13.6 Version
697