[1.3L and 1.6L engine models]
[1.8L engine model]
1. Drain plug
3. Cooling fan coupler
2. Radiator
1. Front grill
2. Clip
[1.3L and 1.6L engine models]
[1.8L engine model]
1. Radiator
3. Radiator inlet hose
2. Reservoir hose
RADIATOR
REMOVAL
1) Disconnect negative cable at battery.
2) Drain cooling system by loosening drain plug of radiator.
3) Disconnect coupler of cooling fan motor.
4) Remove front grill by removing its clips.
5) Disconnect radiator inlet and outlet hoses and reservoir tank
hose from radiator.
6) With automatic transmission (A/T) vehicle, disconnect addition-
al 2 fluid hoses from radiator.
Place some container under radiator to receive A/T fluid which
will flow out when hose is disconnected.
7) Remove radiator and cooling fan motor.
ENGINE COOLING 6B-19