Clear Counters Vrrp Ipv6; Debug Vrrp Ipv6 - Dell C9000 Series Reference Manual

clear counters vrrp ipv6

Clear the counters recorded for IPv6 VRRP groups.
C9000 Series
Syntax
clear counters vrrp ipv6 [vrid | vrf instance]
Parameters
vrid
vrf instance
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2.(1.0)
8.3.19.0
8.3.10.0
8.4.1.0
8.3.2.0

debug vrrp ipv6

Enable debugging of VRRP.
C9000 Series
Syntax
debug vrrp ipv6 interface [vrid] {all | packets | state | timer}
(OPTIONAL) Enter the number of an IPv6 VRRP group. The
range is from 1 to 255.
(OPTIONAL) Enter the name of a VRF instance (32 characters
maximum) to clear the counters of all IPv6 VRRP groups in the
specified VRF.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on E-Series ExaScale, C-Series, and S-Series.
Support was added for IPv6 VRRP groups in non-default VRF
instances.
Introduced on the E-Series TeraScale.
Virtual Router Redundancy Protocol (VRRP) 2257