Dell C9000 Series Reference Manual page 2239

vrrp-id
all
bfd
database
interface
ipv6
packets
state
timer
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
• For Port Channel interface types, enter the keywords
port-channel then the number. The range is from 1 to
128.
• For a 40-Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN interface, enter the keyword vlan then the
VLAN ID. The VLAN ID range is from 1 to 4094.
(OPTIONAL) Enter a number from 1 to 255 as the VRRP group
ID.
Enter the keyword all to enable debugging of all VRRP groups.
Enter the keyword bfd to enable debugging of VRRP BFD
interactions.
Enter the keyword database to enable debugging of
configuration changes.
Enter the keyword interface to enable debugging of interface
state changes..
Enter the keyword ipv6 to enable debugging for IPv6.
Enter the keyword packets to enable debugging of VRRP
control packets.
Enter the keyword state to enable debugging of VRRP state
changes.
Enter the keyword timer to enable debugging of the VRRP
timer.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Virtual Router Redundancy Protocol (VRRP) 2239