Show Running-Config Monitor Session - Dell Force10 S4810P Reference Manual

Related monitor session
Commands

show running-config monitor session

Display the running configuration of all monitor sessions or a specific session.
C-Series, E-Series, S-Series, S4810
Syntax show running-config monitor session {session-ID}
To display the running configuration for all monitor sessions, use the show running-
config monitor session command.
Parameters
session-ID
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.7.1.0
Version 7.5.1.0
Version 7.4.1.0
Usage The monitoring command is saved in the running configuration at the Monitor Session
Information mode level and can be restored after a chassis reload.
Example
FTOS#show running-config monitor session
!
monitor session 8
10/1 direction rx
!
monitor session 11
10/47 direction rx
FTOS#show running-config monitor session 11
!
monitor session 11
10/47 direction rx
– Creates a session for monitoring.
(OPTIONAL) Enter a session identification number. The range 0 to
65535.
• EXEC
• EXEC Privilege
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
source GigabitEthernet 10/46 destination GigabitEthernet
source GigabitEthernet 10/0 destination GigabitEthernet
source GigabitEthernet 10/0 destination GigabitEthernet
1273