Debug Vrrp - Dell C9000 Series Reference Manual

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Example
Dell#clear counters vrrp vrf indus
Clear "show vrrp" counters of all vrrp groups on all interfaces
in VRF indus [confirm] yes

debug vrrp

Enable debugging of VRRP.
C9000 Series
Syntax
debug vrrp interface [vrrp-id] {all | bfd | database | interface |
ipv6 | packets | state | timer}
To disable debugging, use the no debug vrrp interface [vrrp-id] {all |
bfd | database | interface | ipv6 | packets | state | timer}
command.
Parameters
interface
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Added support for VRF.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the following keywords and slot/port or number
information
Virtual Router Redundancy Protocol (VRRP) 2238