Vrrp-Ipv6-Group - Dell C9000 Series Reference Manual

Line Beginning
with
Virtual IP address
Tracking states...
Example
Dell#show vrrp ipv6
------------------
TenGigabitEthernet 5/6, IPv6 VRID: 255, Version: 3, Net:
fe80::201:e8ff:fe7a:6bb9
VRF: 0 default-vrf
State: Master, Priority: 101, Master: fe80::201:e8ff:fe7a:6bb9
(local)
Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec
Accept Mode: FALSE, Master AdvInt: 100 centisec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 64
Virtual MAC address:
Virtual IP address:

vrrp-ipv6-group

Assign an interface to a VRRP group.
C9000 Series
Syntax
vrrp-ipv6-group vrid
Parameters
vrid
Defaults Not configured.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Description
Displays the virtual IP address of the VRRP router to which the
interface is connected.
Displays information on the tracked interfaces or objects
configured for a VRRP group (track command), including:
•
•
•
00:00:5e:00:02:ff
1::255 fe80::255
Enter the virtual-router ID number of the VRRP group. The VRID
range is from 1 to 255.
UP or DOWN state of the tracked interface or object (Up or
Dn).
Interface type and slot/port or object number, description,
and time since the last change in the state of the tracked
object.
Cost subtracted from the VRRP group priority if the state of
the tracked interface/object goes DOWN.
Virtual Router Redundancy Protocol (VRRP) 2261