Dell C9000 Series Reference Manual page 2246

brief
ipv6
vrf vrf-name
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the
relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
9.0.2.0
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Usage Information The following describes the show vrrp brief command shown in the following
example.
Item
Interface
Grp
Pri
• For a VLAN interface, enter the keyword vlan then the VLAN
ID. The VLAN ID range is from 1 to 4094.
(OPTIONAL) Enter the keyword brief to view a table of
information on the VRRP groups.
(OPTIONAL) Enter the keyword brief to view a table of
information on the VRRP groups.
(OPTIONAL) Enter the keyword vrf and then the name of the VRF
to view active VRRP groups corresponding to that VRF.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Added support for VRF.
Introduced on the S6000.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Lists the interface type, slot and port on which the VRRP group is
configured.
Displays the VRRP group ID.
Displays the priority value assigned to the interface. If the track
command is configured to track that interface and the interface is
Virtual Router Redundancy Protocol (VRRP) 2246