Version - Dell C9000 Series Reference Manual

Networking command-line reference guide
Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

Example (C9000)
Dell#show run vrf
!
ip vrf indus 1
Dell#show run int te 1/20
!
interface TenGigabitEthernet 1/20
ip vrf forwarding indus
ip address 2.1.1.1/24
!
vrrp-group 10
no shutdown
Dell#show vrrp vrf indus
------------------
TenGigabitEthernet 1/20, IPv4 VRID: 10, Version: 2, Net: 2.1.1.1
VRF: 1 indus
State: Master, Priority: 200, Master: 2.1.1.1 (local)
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 107, Gratuitous ARP sent: 1
Virtual MAC address:
00:00:5e:00:01:0a
Virtual IP address:
2.1.1.20
Authentication:
type: simple
Dell#show vrrp vrf indus brief
Interface Group
-----------------------------------------------------------------------------
Te 1/20
Dell#

version

Set VRRP protocol version for IPv4 group.
C9000 Series
Syntax
version {2 | 3 | both}
To return to the default setting, use the no version command.
Parameters
2
3
authentication-type simple 7 7ba207e73007dfaf
priority 200
virtual-address 2.1.1.20
Pri Pre State
IPv4 10
Enter the 2 parameter to specify VRRP version 2 as defined by
RFC 3768, Virtual Router Redundancy Protocol.
Enter the 2 parameter to specify VRRP version 3 as defined in
RFC 5798, Virtual Router Redundancy.
Master addr
200 Y
Master 2.1.1.1
Virtual Router Redundancy Protocol (VRRP)
Virtual addr(s) Description
2.1.1.20
2249

Advertisement

Table of Contents
loading

Table of Contents