Show Vlt Counters - Dell C9000 Series Reference Manual

show vlt counters

Displays the counter information.
C9000 Series
Syntax
show vlt counters [arp| igmp-snoop | interface | mac | ndp]
Parameters
arp
igmp-snoop
interface
mac
ndp
Default Not configured.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
Usage Information If you do not add a parameter such as arp or mac, the output displays all of the
counters.
Enter the keyword arp to display the ARP counter information
for the VLT.
Enter the keywords igmp-snoop to display the igmp-snooping
counter information for the VLT.
Enter the keyword interface to display the interface counter
information for the VLT.
Enter the keyword mac to display the MAC address counter
information for the VLT.
Enter the keyword ndp to display the VLT counter information
for NDP.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Virtual Link Trunking (VLT) 2216