Dell C9000 Series Reference Manual page 2247

Item
Pre
State
Master addr
Virtual addr(s)
Usage Information The following describes the show vrrp command shown in the following example.
Field
TenGigabitEthern
et 12/3...
State: master...
Hold Down:...
Adv rcvd:...
Description
disabled, the cost is subtracted from the priority value assigned to
the interface.
States whether preempt is enabled on the interface.
• Y = Preempt is enabled.
• N = Preempt is not enabled.
Displays the operational state of the interface by using one of the
following:
• NA/IF (the interface is not available).
• MASTER (the interface associated with the MASTER router).
• BACKUP (the interface associated with the BACKUP router).
Displays the IP address of the MASTER router.
Displays the virtual IP addresses of the VRRP routers associated with
the interface.
Description
Displays the Interface, the VRRP group ID, and the network address.
If the interface is not sending VRRP packets, 0.0.0.0 appears as the
network address.
Displays the interface's state:
• Na/If (not available)
• master (MASTER virtual router)
• backup (BACKUP virtual router)
the interface's priority and the IP address of the MASTER.
This line displays additional VRRP configuration information:
• Hold Down displays the hold down timer interval in seconds.
• Preempt displays TRUE if preempt is configured and FALSE if
preempt is not configured.
• AdvInt displays the Advertise Interval in seconds.
This line displays counters for the following:
• Adv rcvd displays the number of VRRP advertisements received
on the interface.
• Adv sent displays the number of VRRP advertisements sent on
the interface.
Virtual Router Redundancy Protocol (VRRP) 2247