System Time - Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Procedure
Configuring a notification
1. Select the receiver for SNMPv3 notifications in the "SNMPv3 Notify User" drop-down
list.
2. Select the security level for SNMPv3 notifications in the "SNMPv3 Notify Security
Level" drop-down list.
3. Select the receiver type in the "Notification Receiver Type" drop-down list.
4. In "Notification Receiver Address", enter the IP address of the station to which the
device should send traps or notifications.
5. Click the "Create" button to create a new trap entry.
6. Activate "Notification" in the required row.
7. Click the "Set Values" button.
Deleting a trap entry
1. Enable "Select" in the row to be deleted.
2. Click the "Delete" button. The entry is deleted.
4.4.10

System time

There are different methods that can be used to set the system time of the device. Only
one method can be active at any one time.
If one method is activated, the previously activated method is automatically deactivated.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
Configuring with Web Based Management
4.4 "System" menu
177