System Time; System Time Setting; The "Show" Commands; Show Time - Siemens SCALANCE XM-400 Configuration Manual

System time

5.1

System time setting

This section describes commands relevant for the configuration of the system time.
5.1.1

The "show" commands

This section describes commands with which you display various settings.
5.1.1.1

show time

Description
This command shows the settings of the system clock.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show time
Result
The settings for the system clock are displayed.
5.1.1.2

show dst info

Description
This command shows all the entries for daylight saving time stored on the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
or
cli#
or
cli#
5
145