Copying Jobs; Copying Jobs On The Job Content Window - YASKAWA DX100 Operator's Manual

DX100
5.1

5.1.0.1 Copying Jobs on the JOB CONTENT Window

5 Editing Jobs

5.1 Copying Jobs

Copying Jobs
This operation is used to copy registered jobs and use them to create new
jobs. It can be done using either the JOB CONTENT window or the JOB
LIST window.
On the JOB CONTENT window, the current edit job becomes the copy
source job.
1. Select {JOB} under the main menu.
2. Select {JOB}.
– The JOB CONTENT window appears.
3. Select {JOB}  {COPY JOB} under the pull-down menu.
4. Input the job name.
– Input the new job name.
– The name of the copy source job is displayed on the input area. It is
possible to partially change this name to enter a new name.
5-2
155507-1CD
RE-CSO-A037
228 of 554