Mass Storage Catalog (Remote Command Only); Mass Storage Change Directory (Remote Command Only) - Agilent Technologies X Series Manual

System Functions
Save

Mass Storage Catalog (Remote Command Only)

Remote Command
Notes
Initial S/W Revision

Mass Storage Change Directory (Remote Command Only)

Remote Command
Notes
Initial S/W Revision
144
:MMEMory:CATalog? [<directory_name>]
The string must be a valid logical path.
Query disk usage information (drive capacity, free space available) and obtain
a list of files and directories in a specified directory in the following format:
<numeric_value>,<numeric_value>,{<file_entry>}
It shall return two numeric parameters and as many strings as there are files
and directories. The first parameter shall indicate the total amount of storage
currently used in bytes. The second parameter shall indicate the total amount
of storage available, also in bytes. The <file_entry> is a string. Each
<file_entry> shall indicate the name, type, and size of one file in the directory
list:
<file_name>,<file_type>,<file_size>
As windows file system has an extension that indicates file type, <file_type>
is always empty. <file_size> provides the size of the file in bytes. In case of
directories, <file_entry> is surrounded by square brackets and both
<file_type> and <file_size> are empty.
Prior to A.02.00
:MMEMory:CDIRectory [<directory_name>]
:MMEMory:CDIRectory?
The string must be a valid logical path.
Changes the default directory for a mass memory file system. The
<directory_name> parameter is a string. If no parameter is specified, the
directory is set to the *RST value.
At *RST, this value is set to the default user data storage area, that is defined
as System.Environment.SpecialFolder.Personal.
Query returns full path of the default directory.
Prior to A.02.00