12.3 GOT Side Settings
12.3.1
Setting communication interface (Controller Setting)
Set the channel of the connected equipment.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: MITSUBISHI ELECTRIC
• Controller Type
• I/F: Interface to be used
• Driver:CC-Link Ver2 (ID)
*1
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
➠
Click the [OK] button when settings are completed.
12 - 12
12.3 GOT Side Settings
2.
[Controller Setting] from the menu.
*1
: Set according to the Controller Type to be connected.
In the case of MELSEC iQ-F series or MELSEC-FX, Please be set to any of the following.
[MELSEC iQ-R, RnMT], [MELSEC-Q/QS, Q17nD/M/NC/DR, CRnD-700], [MELSEC-QnA, MELDAS C6*], [MELSEC-L],
[MELSEC-A]
12.3.2 Communication detail settings
POINT
POINT
POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
➠
1.1.3 I/F communication setting
3.
4.
Click!