17.4.4
Ethernet setting
Item
Host
N/W No.
*2
PLC No.
Unit Type
IP Address
Port No.
Communication
*1
For operating CNC monitor function, set N/W No. to "239".
*2
Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠
17.4.2 Communication detail settings
Description
The host is displayed. (The host is indicated with an asterisk (*))
Set the network No. of the connected Ethernet module. (Default: blank)
Set the station No. of the connected Ethernet module. (Default: blank)
Set the type of the connected Ethernet module. (Default: QJ71E71)
Set the IP address of the connected Ethernet module. (Default: blank)
Set the port No. of the connected Ethernet module. (Default: 5001)
UDP (fixed)
Range
―
*1
Network No. of CNC
Station No. of CNC
AJ71QE71
IP address of CNC
5001
UDP (fixed)
17.4 GOT Side Settings
17
17 - 15