Mitsubishi Electric GOT2000 Series Connection Manual page 1133

Step 11.
Set as shown below and click [OK].
• When the GOT and PLC are on the same network
Select [Access to CC IE Cont module set on PLC side I/F].
• When the GOT and PLC are on the different networks
Select [Other station in the same loop or access to multilevel system] and set [Network No.] and [Station
No.].
Step 12.
The screen returns to the [Connection Channel Setup]. Click [Connection Test] to check if GX Works3 has
been connected to the RCPU.
MELSOFT GX Works3
22.7 Personal Computer Side Setting
22
22 - 77