Mitsubishi Electric GOT2000 Series Connection Manual page 783

■2. Communication detail settings
Make the settings according to the usage environment.
(1) FREQROL 500/700/800, SENSORLESS SERVO
Item
Transmission Speed
Data Bit
Stop Bit
Parity
Retry
Timeout Time
Delay Time
(2) FREQROL 800
(For automatic connection)
Item
Transmission Speed
Data Bit
Stop Bit
Description
Set this item when change the transmission speed used for
communication with the connected equipment.
(Default: 19200bps)
Set this item when change the data length used for communication
with the connected equipment.
(Default: 7bits)
Specify the stop bit length for communications.
(Default: 1bit)
Specify whether or not to perform a parity check, and how it is
performed during communication.
(Default: Odd)
Set the number of retries to be performed when a communication
timeout occurs.
(Default: 0time)
Set the time period for a communication to time out.
(Default: 3sec)
Set this item to adjust the transmission timing of the communication
request from the GOT.
(Default: 10ms)
Description
Set this item when change the transmission speed used for
communication with the connected equipment.
(Default: 115200bps)
Set this item when change the data length used for communication with
the connected equipment.
(Default: 8bits)
Specify the stop bit length for communications.
(Default: 1bit)
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
7bits/8bits
1bit/2bits
None
Even
Odd
0 to 5times
1 to 30sec
0 to 300ms
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
8bits
1bit
14.2 System Configuration
Range
14
Range
14 - 27