Mitsubishi Electric GOT2000 Series Connection Manual page 559

■5. [Controller Setting] of GT Designer3
Retry
Timeout Time
■6. Setting of the MELSECNET/10 communication unit
Network number setting switch
Group number setting switch
Station number setting switch
Mode setting switch
Item
POINT POINT POINT
[Controller Setting] of GT Designer3
For the setting method of [Controller Setting] of GT Designer3, refer to the following.
➠
9.3.1 Setting communication interface (Controller Setting)
Item
POINT POINT POINT
Setting of the MELSECNET/10 communication unit
For the setting method of the MELSECNET/10 communication unit, refer to the following.
➠
9.3.1 Setting communication interface (Controller Setting)
9.5 PLC side setting when connecting to MELSEC/10
Set value (Use default)
3times
Set value
1: Network No.1
0: No group setting (fixed)
2: Station No.2
0: Online (fixed)
3sec
9 - 35
9