Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

17.4 GOT Side Settings

17.4.1 Setting communication interface (Controller Setting)
Set the channel of the connected equipment.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: MITSUBISHI ELECTRIC
• Controller Type:
MELSEC-QnA/Q/QS, MELDAS C6*
I/F: Interface to be used
• Driver:
For direct connection to CPU
AJ71QC24, MELDAS C6*
For ELSECNET/10 connection
MELSECNET/H (used in MNET/10 mode of [Network Type])
For CC-Link (ID) connection
CC-Link Ver2 (ID)
CC-Link (ID)
For Ethernet connection
Ethernet (MELSEC), Q17nNC, CRnD-700
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
➠
Click the [OK] button when settings are completed.
17 - 8
17.4 GOT Side Settings
2.
[Controller Setting] from the menu.
17.4.2 Communication detail settings
POINT POINT POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
➠ 1.1.3 I/F communication setting
3.
4.
Click!