Connecting To Melsec-Q/L Series - Mitsubishi Electric GOT2000 Series Connection Manual

10.4.3

Connecting to MELSEC-Q/L series

■1. System configuration1 (Network Type: CC IE Control)
*1
■2. System configuration2 (Network Type: CC IE Control extended mode)
*1
10 - 26
10.4 PLC Side Setting
CC-Link IE Controller Network
<CC-Link IE Controller Network module> *
(Use the default value for settings other than the following.)
The CC-Link IE Controller Network module is mounted on slot 0 of the base unit.
The start I/O No. of the CC-Link IE Controller Network module is set at [0].
POINT POINT POINT
When connecting to Q170MCPU or Q170MSCPU(-S1)
When connected to Q170MCPU or Q170MSCPU(-S1), the start I/O No. of the CC-Link IE
Controller Network module is set to "70".
CC-Link IE Controller Network
<CC-Link IE Controller Network module> *
(Use the default value for settings other than the following.)
The CC-Link IE Controller Network module is mounted on slot 0 of the base unit.
The start I/O No. of the CC-Link IE Controller Network module is set at [0].
<GOT>
(Use the default value for settings other
than the following.)
1
Station No. : 1
Mode : Online
Network type : CC IE Control (Control station)
Network No. : 1
Total stations : 2
LB0000 to LB00FF
Network range assignment :
H
LW00000 to LW000FF
H
<GOT>
(Use the default value for settings other
than the following.)
1
Station No. : 1
Mode : Online
Network type : CC IE Control extended mode
(Control station)
Network No. : 1
LB0000 to LB00FF
Total stations : 2
H
LW00000 to LW000FF
Network range assignment :
H
LB0100 to LB01FF
H H
LW00100 to LW001FF
H H
H
H
LB0100 to LB01FF
H H
LW00100 to LW001FF
H H
H
H