Mitsubishi Electric GOT2000 Series Connection Manual page 205

(3) PLC Side Setting (GX Works3)
(a) Redundant CPU (Master station)
1) [Operation mode]
Set to [Redundant].
2) [I/O Assignment]
Set [I/O Assignment] in [System parameter].
At [I/O Assignment], assign the redundant function module (R6RFM) and the CC-Link IE field network module
(RJ71GF11-T2(MR)).
3) [Module Parameter]-[Required Settings]
Set [Module Parameter] of the CC-Link IE field network module (RJ71GF11-T2(MR)).
Station type
*1
Network No.
Station number setting
Station No.
Parameter setting
*1 Specify the same network No. as that of the GOT.
4) [Module Parameter]-[Basic Settings]
Set [Module Parameter] of the CC-Link IE field network module (RJ71GF11-T2(MR)).

[Network Topology]
Set [Network Topology] to [Ring].
Item Set value
Master station (fixed)
1
Parameter Editor
0 (fixed)
Parameter Editor (fixed)
4.1 MELSEC iQ-R Series
4
4 - 29