Mitsubishi Electric GOT2000 Series Connection Manual page 1130

Step 6.
Double-click [GOT] of the PLC side I/F to display [PLC side I/F Detailed Setting of GOT].
Step 7.
Set the IP address and port No. in [Ethernet detail setting for PC and GOT connection].
Set the IP address and port No. to the same as the Ethernet download setting.
➠
Step 8.
Check-mark [C24] in [Detail setting for GOT and PLC connection].
Step 9.
The screen returns to the [Connection Channel Setup]. Click [Connection Test] to check if GX Works3 has
been connected to the RCPU.
22 - 74
22.7 Personal Computer Side Setting
22.6.1 (2) Ethernet download setting
MELSOFT GX Works3