Connecting To Cc-Link Module (Melsec Iq-F Series, Melsec-Fx) With Ver.1/Ver.2 Compatibles Mixed - Mitsubishi Electric GOT2000 Series Connection Manual

12.4.12 Connecting to CC-Link module (MELSEC iQ-F Series, MELSEC-FX)
with Ver.1/Ver.2 compatibles mixed
This section describes the setting of the GOT and CC-Link module (MELSEC iQ-F Series, MELSEC-FX) with Ver.1/Ver.2
compatibles mixed in the following system configuration.
■1. System configuration
■2. Switch setting of CC-Link module (MELSEC iQ-F Series, MELSEC-FX)
Set the station number setting switch, transmission speed/mode setting switch.
(1) Station number setting switch
Station number setting switch
POINT POINT POINT
CC-Link module (MELSEC iQ-F Series, MELSEC-FX)
For details of the CC-Link module (MELSEC iQ-F Series, MELSEC-FX), refer to the following
manual.
➠
FX3U-16CCL-M USER'S MANUAL
<CC-Link module> *1
(Use default value for settings other than the following.)
Type : Master station
Station No. : Station No. 0
Mode : Remote net (Ver.2 mode)
All connect count : 2
Transmission speed : 156kbps
Description
Station number setting
(master station)
<GOT (Ver.1 compatible)>
(Use default value for settings other
than the following.)
Station type : Intelligent device station
Station No. : Station No. 1 (1st unit)
Number of stations occupied : Exclusive station 3
Transmission speed : 156kbps
<GOT (Ver.2 compatible)>
(Use default value for settings other
than the following.)
Station type : Intelligent device station
Station No. : Station No. 4 (2nd unit)
Expanded cyclic setting : Quadruple
Number of stations occupied
: Exclusive station 1
Transmission speed : 156kbps
(1)
(2)
Set value
0 (fixed)
: Necessary
12.4 PLC Side Setting
Setting necessity at GOT
connection
○
: As necessary : Not necessary
12 - 71
12