Mitsubishi Electric GOT2000 Series Connection Manual page 614

(2) [Controller Setting] of GT Designer3
Network type
Network No.
Station No.
Group No.
Mode
Refresh Interval
Retry
Timeout Time
Delay Time
Monitor Speed
10 - 36
10.4 PLC Side Setting
Item
POINT POINT POINT
(1) Network type of the GOT side
When the network is in the extended mode, be sure to set the network type of the GOT side
to [CC IE Control extended mode].
For [Controller Setting], of GT Designer3, refer to the following.
➠
10.3.1 Setting communication interface (Controller Setting)
(2) Network type of the PLC side
Only GX Works2 can set [CC IE Control extended mode (control station)] or [CC IE Control
extended mode (ordinary station)]. The CPU which is compatible with the extended mode is
Universal model QCPU only.
Set value
CC IE Control extended mode
1: Network No.1
2: Station No.2
0 (Fixed)
Online (auto. reconnection)
High (Use default value)
3times (Use default value)
3sec (Use default value)
1ms (Use default value)
High(Normal) (Use default value)