Parameter Setting (When Connecting To C Controller Module (Q Series)) - Mitsubishi Electric GOT2000 Series Connection Manual

13.5.5

Parameter setting (when connecting to C Controller module (Q Series))

Use SW3PVC-CCPU-E Ver.3.05F or later for the C Controller module setting utility.
■1. Connection settings
*1
Target module
Write authority
*2
User name
*2
Password
Detailed settings
*1 If the IP address of the C Controller module (Q Series) has been changed, input the changed IP address or host name.
*2 If the account of the C Controller module (Q Series) has been changed, input the changed user name and password.
Item Set value
192.168.3.3
Mark the checkbox
target
password
-
: Necessary : As necessary
13.5 PLC Side Settings
Setting necessity
at GOT connection
: Not necessary
13
13 - 25