Mitsubishi Electric GOT2000 Series Connection Manual page 547

■2. Connecting to C Controller module (Q Series)
Use SW3PVC-CCPU-E Ver.3.05F or later for the MELSECNET/H utility.
(1) Connection settings
*1
Target module
Write authority
*2
User name
*2
Password
Detailed settings
*1 If the IP address of the C Controller module (Q Series) has been changed, input the changed IP address or host name.
*2 If the account of the C Controller module (Q Series) has been changed, input the changed user name and password.
Item
9.4 PLC side setting when connecting to MELSECNET/H
Set value
192.168.3.3 (Default)
Mark the checkbox
target
password
-
: Necessary : As necessary
Setting necessity at GOT
connection
: Not necessary
9 - 23
9