Mitsubishi Electric GOT2000 Series Connection Manual page 1138

Step 7.
Set the [CPU mode] and [Relay network No.] and [Relay station No.].
• When the target PLC has the same network No. as that of the GOT
• When the target PLC has a different network No. from that of the GOT
Step 8.
Return [Transfer Setup], click [Other Station (Single Network)], and double-click [CC IE Field].
Step 9.
Set as shown below and click [OK].
• When the GOT and PLC are on the same network
• When the GOT and PLC are on the different networks
Step 10.
The screen returns to the [Connection Channel Setup]. Click [Connection Test] to check if GX Works3
has been connected to the FX5CPU.
22 - 82
22.7 Personal Computer Side Setting
Set the number assigned to the PLC that is targeted by using the transparent function and CC-Link
IE field network module.
Set the number assigned the PLC that is used as a relay station and CC-Link IE field network
module.
Select [Access to CC IE Field module set on PLC side I/F].
Select [Other station in the same loop or access to multilevel system] and set [Network No.] and
[Station No.].
MELSOFT GX Works3