Mitsubishi Electric GOT2000 Series Connection Manual page 164

Example 3: When using CPU direct connection or serial communication connection
• Monitor accessible range of devices (other than B or W) of other stations or other networks
Specify the accessing network No. or station as shown in the following table.
(1) To monitor B or W of the connected station (host station) assigned with a network parameter,
specify the host station.
(2) To monitor another station (other than B or W) or another network, specify the station (network
No. and station No.).
Station connected to GOT
AnU (1-1)
Q (Q mode) (1-2)
AnA (1-3)
AnU (1-4) (2-2)
QnA (2-1)
AnN (2-3)
AnU (2-4)
3 - 10
3.1 Access Range for Monitoring Stations on Network Systems
Control station
AnU
(1-1)
Q(Q mode)
Network No.1
(1-2)
AnA
(1-3)
Network No.1
Q(Q mode)
AnU (1-1)
(1-2)
Host ──
Other (1-1) Host
Other (0-0) ──
Other (1-1) ──
Other (1-1) Other (1-2)
── ──
── ──
POINT POINT POINT
Monitoring link device B or W
For monitoring devices B and W that are allocated by the link parameter, use the host device
number even when designating devices allocated to another station.
Otherwise, the display speed will be reduced.
Control station
QnA
(2-1)
AnU
(1-4)
Network No.2
(2-2)
AnN
(2-3)
Station to be accessed
AnA (1-3) AnU (1-4) QnA (2-1)
Other (1-3) Other (1-4)
── Other (1-4) Other (2-1)
Host ──
── Host
── Other (1-4)
── ──
── ──
AnU
(2-4)
Network No.2
AnU (2-2) AnN (2-3)
── Other (2-2) ──
Other (2-2) ──
── ── ──
── Host ──
Host Other (2-2) Other (2-3)
── ── Host
── Other (2-2) ──
How to read the table
Accessibility
Upper line:
: Accessible
: Not accessible
Lower line:
Network settings
Host
Other (Network No. - Station number)
AnU (2-4)
──
Other (2-4)
──
──
Other (2-4)
──
Host