Mitsubishi Electric GOT2000 Series Connection Manual page 556

■4. Parameter setting (when connecting to C Controller module (Q Series))
Use SW3PVC-CCPU-E Ver.3.05F or later for the MELSECNET/H utility.
(1) Connecting to C Controller module (Q Series)
(a) Connection settings
Target module
Write authority
*2
User name
*2
Password
Detailed settings
*1
*2
9 - 32
9.5 PLC side setting when connecting to MELSEC/10
Item
*1
If the IP address of the C Controller module (Q Series) has been changed, input the changed IP address or host name.
If the account of the C Controller module (Q Series) has been changed, input the changed user name and password.
Set value
192.168.3.3 (Default)
Mark the checkbox
target
password
-
: Necessary : As necessary
Setting necessity at GOT
connection
: Not necessary