Parameter Setting - Mitsubishi Electric GOT2000 Series Connection Manual

9.4.3

Parameter setting

■1. Connecting to MELSEC-Q or QS series
(1) [Network parameter] of GX Developer
(a) Network parameter
Network type
Starting I/O No.
*2
Network No.
Total stations
Group No.
*3
Mode
Network range assignment
Refresh parameters
Interrupt settings
Control station return setting
Redundant settings
Interlink transmission parameters
Routing parameters
*1
*2
*3
*4
9 - 20
9.4 PLC side setting when connecting to MELSECNET/H
Item
*1
*4
When using Q170MCPU or Q170MSCPU(-S1), set it according to the system configuration.
Specify the same network No. as that of the GOT.
Set the same mode setting as that of the GOT.
Set it when the MELSECNET/H network module is used in the redundant QnPRHCPU system.
Set value
MNET/H mode (Control station) (fixed)
0000H
1
2
0 (fixed)
Online
Refer to (b).
(Use default value)
Refer to (c).
: Necessary
Setting necessity at GOT
connection
: As necessary : Not necessary