Mitsubishi Electric GOT2000 Series Connection Manual page 636

■2. Parameter settings (Connection to MELSEC-Q, QS series) of System configuration
(Network Type: CC IE Field)
(1) Network parameter] of GX Works2
Use GX Works2 of Version 1.31H or later.
(a) Network parameter
Network type
Starting I/O No.
*2
Network No.
Total stations
Station No.
*3
Mode
Network Configuration Settings
Refresh parameters
Interrupt settings
Interlink transmission parameters
Routing parameters
*1
*2
*3
11 - 20
11.4 PLC Side Setting
Item
*1
When using Q170MCPU or Q170MSCPU(-S1), set it according to the system configuration.
Specify the same network No. as that of the GOT.
Set the same mode setting as that of the GOT.
Set value
CC IE Field (Master station) (fixed)
0000H
1
1
0 (fixed)
Online (Normal mode)
Refer to (b)
(Use default value)
Refer to (c)
: Necessary : As necessary
Setting necessity at GOT
connection
: Not necessary