■5. Module parameter settings of System configuration2 (Network Type: Extended mode)
(1) [Module parameter] of CW Configurator
(a)
Module parameter
Station type
*1
Network No.
Station number setting
Network range assignment
POINT
POINT
POINT
[Controller Setting] of GT Designer3
For the setting method of [Controller Setting] of GT Designer3, refer to the following.
➠
10.3.1 Setting communication interface (Controller Setting)
Item
Set value
CC IE Control (Control station)
1
1
Refer to (b)
: Necessary
: As necessary
10.4 PLC Side Setting
Setting necessity at GOT connection
: Not necessary
10 - 23
10