Mitsubishi Electric GOT2000 Series Connection Manual page 564

■3. [Network parameter] of GX Developer
(1) Network parameter
Network type
Start I/O No.
*1
Network No.
Total stations
Network range assignment
Refresh parameters
Interlink transmission parameters
Routing parameters
*1
9 - 40
9.5 PLC side setting when connecting to MELSEC/10
Item
Specify the same network No. as that of the network number setting switch of the MELSECNET/10 network module.
Set value
MNET/10 (Control station) (fixed)
0000H
1
2
Refer to (2)
(Use default value)
Refer to (3)
: Necessary
Setting necessity at GOT
connection
: As necessary : Not necessary