Connecting With Cc-Link Ver.2 Compatible - Mitsubishi Electric GOT2000 Series Connection Manual

12.2.2

Connecting with CC-Link Ver.2 compatible

PLC
PLC
Model name
CC-Link module
MELSEC iQ-R
Series
Motion controller
CPU (MELSEC
iQ-R Series)
C Controller RJ61BT11
module (MELSEC
iQ-R Series)
CNC C80
CR800-
R(R16RTCPU)
MELSEC-Q
(Q mode)
C Controller
module (Q Series)
Motion controller QJ61BT11N
CPU (Q Series)
CNC C70
Robot controller
(CRnQ-700)
MELSEC-L LJ61BT11
MELSEC-L
(L26CPU-BT)
(L26CPU-PBT)
MELSEC iQ-F
FX3U-16CCL-M
*5
series
FX5-CCL-MS
*6
MELSEC-FX
*1
*2
*3
*4
*5
*6
*7
12 - 10
12.2 System Configuration
CC-Link
module
Communication
*1
type
CC-Link (Ver.2)
-
For the system configuration of the CC-Link module, refer to the following manual.
➠
CC-Link System Master/Local Module User's Manual QJ61BT11N
MELSEC-L CC-Link System Master/Local Module User's Manual
For the specifications and inquiries of the CC-Link dedicated cable, refer to the following.
➠
CC-Link Partner Association's home page: http://www.cc-link.org/
The maximum overall extension cable length and the length between stations vary depending on the cable type to be used and
the transmission speed.
For details, refer to the following manual.
➠
CC-Link System Master/Local Module User's Manual QJ61BT11N
MELSEC-L CC-Link System Master/Local Module User's Manual
FX3U-16CCL-M USER'S MANUAL
Specify Ver.2 as the mode setting in the Communication Settings to use it.
For details of the settings, refer to the following the manual.
➠
12.3.1 Setting communication interface (Controller Setting)
When using an FX3U-16CCL-M with the MELSEC iQ-F series, bus conversion module (FX5-CNV-BUS or FX5-CNV-BUSC) is
required.
MELSEC-FX do not support FX5-CCL-MS.
GT25-W, GT2505-V does not support the option device.
Connection cable
Connection cable
Max.
Cable model
distance
CC-Link dedicated
*3
*2
cable
GOT
GOT
*7
Model
Option device
GT15-J61BT13
*4
Communication driver
CC-Link Ver2(ID)
Number of
connectable
equipment
26 GOTs
8 GOTs