Mitsubishi Electric GOT2000 Series Connection Manual page 998

■4. Communication detail settings
Make the settings according to the usage environment.
(1) For the connection with GOT
Item
Transmission Speed
Retry
Timeout Time
Delay Time
(2) For the connected equipment
Set the communication detail settings of the driver for controllers according to the connection type.
➠
19 - 34
19.6 Setting of Serial Multi-Drop Connection Unit
Set this item when change the transmission speed used for
communication with the connected equipment. (Default: 115200bps)
Set the number of retries to be performed when a communication
timeout occurs.
When receiving no response after retries, the communication times out.
(Default: 0time)
Set the time period for a communication to time out. (Default: 3sec)
Set this item to adjust the transmission timing of the communication
request from the GOT. (Default: 0ms)
Refer to each chapter.
Description Range
4800bps, 9600bps,
19200bps, 38400bps,
57600bps, 115200bps
0 to 5times
1 to 30sec
0 to 300 ms