Connection To Remote I/O Station In Melsecnet/H Network System - Mitsubishi Electric GOT2000 Series Connection Manual

3.6

Connection to Remote I/O Station in MELSECNET/H Network System

When connected to the remote I/O station of the MELSECNET/H network system, the GOT can monitor the PLC CPU of the
master station.
When connecting the GOT to the remote I/O station, use the following connection methods.
Network No.1
Station No.1
(remote I/O station)
POINT POINT POINT
Connection to remote I/O station of MELSECNET/B, (II) or /10
The GOT cannot be connected to the remote I/O station on the MELSECNET/B, (II) data link
system and MELSECNET/10 network system.
Connect the GOT to the remote I/O station on the MELSECNET/H network system.
Monitor
target
MELSECNET/H remote I/O Network
GOT
(1) Direct CPU (2) Computer link
connection
3.6 Connection to Remote I/O Station in MELSECNET/H Network System
Network No.1
Station No.0
(master station)
Q33B
Q33B
Hub
GOT GOT
(3) Ethernet connection
connection
3
3 - 19