Connection To Built-In Ethernet Port Cpu - Mitsubishi Electric GOT2000 Series Connection Manual

➠
4.1.5 Connection to Remote I/O Station in CC-Link IE Field Network
➠ 4.1.6 Connection to CC-Link (intelligent device station)
➠
4.1.7 When connecting via the serial communication unit
4.1.1

Connection to built-in Ethernet port CPU

■1. One-to-one connection of GOT and redundant system
(1) System configuration example
The following connection configuration examples are explained.
Ethernet
Control system
(system A)
N/W No.: 1(virtual)
PC No.: 1(virtual)
IP address: 192.168.3.1
Port No.: 5006
(2) Connection method
Connect the built-in Ethernet port CPU to the GOT.
➠
5. ETHERNET CONNECTION
(3) PLC Side Setting
(a) Control system (system A) PLC setting (GX Works3)
• Built-in Ethernet port
IP address setting
Subnet Mask
Default Gateway
Online Program Change Permission/
Protection Setting
Communication Data Code
Open Method Setting
Target Device Connection Configuration
Setting
GOT
1)
2) 4)
3)
1) Process CPU
2) Redundant function module
3) Tracking cable
4) CC-Link IE Filed Network Master/Local module
Item
N/W No.: 1(virtual)
PC No.: 3(virtual)
IP address: 192.168.3.18
Port No.: 5001
1)
2) 4)
Standby system
(system B)
Set value
192.168.3.1
-
-
(Use default value)
-
4.1 MELSEC iQ-R Series
(Redundant system: Pair No.1)
N/W No.: 1(virtual)
PC No.: 2(virtual)
IP address: 192.168.3.2
Port No.: 5006
4
4 - 3