Personal Computer Side Setting - Mitsubishi Electric GOT2000 Series Connection Manual

22.7 Personal Computer Side Setting

22.7.1 Accessing by GX Works3
The following shows the procedure to set the FA transparent function of GX Works3.
GX Works3 Version 1.030G or later is required to use the FA transparent function for the RCPU redundant system.
■1. When connecting the GOT and the personal computer by USB
(1) Connecting the GOT and PLC in Ethernet connection
(a) When connecting to RCPU
Step 1.
Click [Online]
Step 2.
[Connection Channel Setup] is displayed.
Step 3.
Set [Connection Channel Setup].
PC side I/F: USB
PLC side I/F: GOT
Other Station Setting: No Specification
[Connection Destination] on GX Works3.
22.7 Personal Computer Side Setting
22
22 - 59