Fr Configurator - Mitsubishi Electric GOT2000 Series Connection Manual

■3. When connecting the GOT and the personal computer by wireless LAN
Servo Servo
amplifier amplifier
PLC
Connection type
For the system configuration
between
the GOT and PLC, refer to the
following.
➠
*1
BUS CONNECTION
➠
DIRECT CONNECTION
TO CPU
*1
*2
*3
*4
22.4.5

FR Configurator

Inverter
Inverter
Connection type
For details on the system configuration
between GOT and Mitsubishi Electric
inverter, refer to the following.
➠
INVERTER CONNECTION
22 - 50
22.4 System Configuration
QCPU +
Motion controller
CPU (Q series)
Varies according to
the connection type.
, SSCNET
GOT
Model Option device
GT25-WLAN
*2*4
LCPU is not applicable to the bus connection.
Set the wireless LAN. For details, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
When the [Access point] is set to the [Operation mode] using the wireless LAN function for the GOT, the wireless LAN access
point is not required.
GT25-W, GT2505-V is not applicable to the bus connection.
Inverter
Varies according to
the connection type.
GOT
Model
Wireless LAN
GOT
Communication
/H
Wireless LAN access point
Model name
For the wireless LAN access point,
use the access point compatible
with IEEE802.11b/g/n.
*3
GOT
Connection cable
Connection cable
Interface Cable model
GT09-C30USB-5P(3m)
USB
GT09-C20USB-5P(2m)
Wireless LAN
access point
Unit
Personal computer
Software
MR Configurator2
Communication driver
PC
FREQROL 500/700/800,
Personal
computer
Max.
Software
distance
3m FR Configurator
Communication driver
Connection type
dependant
PC
Number of
connectable
equipment
1 personal
computer for 1 GOT
SENSORLESS SERVO
Number of
connectable
equipment
1 personal
computer for 1 GOT