Step 5.
Select [USB] in the [PC side I/F Serial Setting] dialog.
(For bus connection)
Step 6.
Double-click [GOT] of the PLC side I/F to display [PLC side I/F Detailed Setting of GOT].
Step 7.
Check-mark either of the following in [PLC side I/F Detailed Setting of GOT].
Bus connection
[via GOT(Bus) transparent mode]
Direct CPU connection
Mark the [via GOT(direct coupled) transparent mode] checkbox.
Step 8.
The screen returns to [Transfer Setup Connection1]. Click [Connection Test] to check if GX Works2 has
been connected to the QCPU (Q mode).
22.7 Personal Computer Side Setting
22
22 - 93